Filter
52 results
25
- 10
- 15
- 20
- 25
- 30
- 50
Featured
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort
Sort by:
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
-
-
-
-
-
3 1/2" Large Cockpit Ventilators (Pair) Helicopter Vents
Fits into a 3 1/4" hole. Suitable for panels between 2mm and 6mm thick.- £24.00
- £24.00
- Unit price
- / per
-
Rocking Vane Round Dash Vent 70mm Dia.
TAKES 50mm HOSE. Use as demist or dash vent. Fits into a 62.5mm hole.- £11.40
- £11.40
- Unit price
- / per
-
Demist Vent 206mm x 46mm
Fit whole through a 38mm x 172 hole in dash top Or separated sandwiching the dash through a 33mm x 85mm hole. Accept our 55mm ducting #DCTHS55.- £18.00
- £18.00
- Unit price
- / per
-
-
Demist Vent 162 x 35mm Rocking Directional Vanes
Size 162mm x 35mm. Ideal for use with our demist plenum #DEMPL. This clever vent has a set of rotating vanes with a knurled thumb-wheel at one end to direct the air. Another knurled thumb-wheel at the other end rotates a cover to reduce...- £10.20
- £10.20
- Unit price
- / per
-
Steel Demist Vent 200mm
40mm O.D inlet. 20omm wide letterbox style outlet.- £12.00
- £12.00
- Unit price
- / per
-
Rectangular Dash Face Vent Left Hand 72mm
TAKES 40mm HOSE. Fits into a 69mm x 56mm hole.- £21.60
- £21.60
- Unit price
- / per
-
Rocking Vane Round Dash Vent 100mm Dia.
TAKES 63MM HOSE. Use as demist or dash vent. Fits into a 77mm hole.- £11.40
- £11.40
- Unit price
- / per
-
Rectangular Dash Face Vent Right Hand 72mm
TAKES 40mm HOSE. Fits into a 69mm x 56mm hole.- £21.60
- £21.60
- Unit price
- / per
-
Aluminium Mesh Vent 200mm x 120mm
200mm x 120mm. Pre drilled 20mm wide frame with 3mm fixing holes.- £16.80
- £16.80
- Unit price
- / per
-
Lightweight Internal Naca Duct Black 220mm
Can be bonded or riveted to body.- £14.40
- £14.40
- Unit price
- / per
-
84mm Black Open Vane Dash Vent
This vent is permanently open but the vaned insert can be swivelled in any direction. Fits in a 76mm hole. 60mm diameter ducting spigot on rear. Weight 49gms. 84mm DIAMETER OPEN VENT #VENT19- £8.40
- £8.40
- Unit price
- / per
-
-
-
Demist Vent 87mm x 14mm
Fits in to a 71mm x 8mm hole. 3mm fixing holes at 77mm centres.- £4.80
- £4.80
- Unit price
- / per
-
Cold Air Ram Ducts 75mm Pair
Ideal for ducting air to air filters or brakes. Fits in to a 85mm hole.- £16.80
- £16.80
- Unit price
- / per
-
Moulded ABS Ram Duct for 80mm Ducting
Ideal for ducting air to air filters or brakes.- £4.20
- £4.20
- Unit price
- / per
-
Moulded ABS Ram Duct for 54mm Ducting
Ideal for ducting air to air filters or brakes.- £4.20
- £4.20
- Unit price
- / per
-
Aluminium Mesh Vent 400mm x 120mm
400mm x 120mm. Pre drilled 20mm wide frame with 3mm fixing holes.- £24.00
- £24.00
- Unit price
- / per
-
42mm Fixed Vane Round Vent
This moulded ABS vent will snap into and rotate in a 42mm hole to direct air for demist, face vent or footwell vent. Bezel diameter 50mm. Height 14mm. Front projection (flange thickness) 1.5mm. NOTE: OUR DUCT HOSE #DCTHS38 CAN BE CAREFULLY GLUED TO THE...- £8.40
- £8.40
- Unit price
- / per
-
Naca Duct Black Small 165mm
Can be bonded or riveted to body. 180mm x 145mm x 25mm high- £12.00
- £12.00
- Unit price
- / per